Skip to product information
  • Vetonek Tumbona con capota y cojín ratán sintético crema

Loom with Capota and Cream synthetic cushion

280,86 €
280,86 € 316,11 €
You save 11% (35,25 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our synthetic ration lounge is a perfect combination of style and functionality, so it will be ideal to relax near the pool, on the balcony, the patio or in the campsite during your vacation or free time. Made of atmosphere resistant synthetic rattan, this loraked is firm, easy to clean and suitable for daily use. It has a robust steel structure with powder coating that makes it very stable and lasting. Both sides of the solar bed can be lifted and adjusted in different forms for the most comfortable sitting or lying position. The bright caded cushion offers maximum comfort and additional support. Thanks to zipper design, the cushion cover is removable to facilitate washing. In addition, the sunbeone is equipped with a folding awning so that the light does not dazzle as long as you take the sun. Delivery includes 1 sour and 1 large seat cushion. Note: We recommend covering the sunbed if it rains, snows, freezes or if other severe weather conditions are given to extend its useful life.

  • Color: Black Rat/Cream White Cushions
  • Material: Ratán pe + steel structure with powder coating
  • Cushion case material: 100% polyester
  • Total dimensions: 195 x 60 x 110 cm (length x width x high)
  • Seat height from the floor: 31 cm
  • Cushion thickness: 5 cm
  • Removable cushion case with zipper
  • Both sides of the sun lumbons are adjustable
  • With a folding awning
  • Outdoors
  • Easy to maintain
  • Easy to clean
  • Delivery includes:
  • 1 x Loom with canopy
  • 1 x large seat cushion

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.