Skip to product information
  • Ubbink Filtro para estanques FiltraPure 4000 26 L 1355967

Ubbink filter for filtrapure pond 4000 26 L 1355967

76,18 €
76,18 € 85,73 €
You save 11% (9,55 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The filtrapure 4000 pond filter set has a single camera filter system with a variety of filter media to filter the pond water. Filters the water in biological-mechanical way through various filter media. Thanks to the middle filter and filter sponge, this filter set provides rapid and effective filtration yield. This simple but effective filter can be prepared and instantly installed in the pond. Its volume is 26 liters and can be used for ponds up to 4000 liters (if there are no fish inside).

  • Color: black
  • Material: High density polyethylene (HDPE)
  • Dimensions: 40 x 29.5 x 35 cm (wide x high x)
  • Apt for ponds up to 4000 L
  • Filter volume: 26 L
  • Recommended UVC lamp (not included): 9 W
  • Recommended pump yield (not included): 1500-1600 l/h
  • With security overflow protection
  • It is placed on the side of the pond
  • Note: This may vary due to the presence and amount of fish and aquatic plants.
  • RECOMMENDED PUMP: SKU 403752 UBBINK SOURCE PUMP "XTRA 900" 1351949 / SKU 403742 SOURCE FOR SOURCE UBBINK "ELIMAX 1000"
  • Delivery includes:
  • 1 x filtration sponge
  • 1 x Medium filter 2 kg + network
  • 1 x 4 -liter bio core
  • 1 x universal hose connector of 1 "x 32 mm
  • 1 x Spray tube sealant ring 1 "x 32 mm

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.