Skip to product information
  • Ubbink Tratamiento de agua de estanques Aqua Clear Plus 250 ml 5000 l

Ubbink Pond Water Treatment Aqua Clear Plus 250 ml 5000 L

25,70 €
25,70 € 28,92 €
You save 11% (3,22 €)
Tax included. Shipping calculated at checkout.

Description

The Aqua Clear Water treatment of the Ubbink brand is a liquid product to take care of the water from the pond that helps recover the clear water from the pond. Benefit agent for pond water: often, the beauty of the garden pond is reduced by the murky and green water that grows in this biotope, especially during the first warm days of spring, due to the lack of biological balance. With Aqua Clear Plus, the pond will once again have a clear and quality water. Aquatic plants. Clarifying the water of the pond is bread ate with this practice of 250 ml. Useful information: It is recommended to take appropriate measures and, especially in the long term, to maintain the biological balance in the water of the pond. Use 50 ml per m³ for dosing and dilute in a cube or shower for a uniform distribution in the water of the pond.

  • Capacity: 250 ml
  • Use: 12.5 ml/250 l of pond water
  • Quickly restores water clarity

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.