Skip to product information
  • Ubbink Tratamiento de agua para estanques Aqua Phos Adsorber 500 ml

Ubbink Water treatment for podics phas adsorbr 500 ml

31,63 €
31,63 € 35,60 €
You save 11% (3,97 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Water treatment for pods Aqua adsorber of ubbink is a liquid product for pond water care that effectively reduces the water phosphate content, preventing algae to feed and proliferate. In addition to carbon and nitrogen, phosphate is the nutrient and the factor that limits the growth of algae. Algae cannot grow without phosphate. The remains of food, fish, leaves, air pollen, etc., all introduce phosphates into the ponds. When the amounts are too high and the pond plants can no longer absorb more phosphates, algae begin to grow. The absorbent Aqua phos eliminates this unwanted nutrient of water. Note: Aqua phos absorb should be used when the water phosphate content of the pond is greater than 0.035 mg/l.

  • Capacity: 500 ml
  • Use: 5 ml/100 l of pond water
  • Liquid product for pond water care that reduces phosphate content
  • Use when the water phosphate content of the pond is greater than 0.035 mg/l

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.