Skip to product information
  • Vetonek Paneles de pared 3D 24 uds GA-WA17 diseño Cullinans

VICART 3D wall panels GA-WA17 DESIGN CULLINANS

80,91 €
80,91 € 91,06 €
You save 11% (10,15 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Considerably classic, but extremely modern, this intriguing contrast is the best way to describe Vetonek's 3D 3D wall panels with its Cullinans design. Where the rest of your deominage determines the main style, our Cullinans wall panels will adapt to that style perfectly. Our 3D wall decoration measures 50 x 50 cm, which allows you to easily install yourself. The original 3D Wall Tiles Wall color is broken white, but the 3D tile can be painted with any type of paint (both water and oil) so you can paint them the color you want. Delivery includes 24 3D wall decoration units that cover a total area of ​​6 m².

  • Color: White
  • Material: molded natural fiber
  • Dimensions per piece: 50 x 50 x 1.75 cm (length x width x high)
  • Quantity: 24 panels (for 6 m² of wall)
  • Painted

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.