Skip to product information
  • Vetonek Sombrilla jardín voladiza con palo y luces LED terracota 250 cm

Voladized garden umbrella with led terracotta 250 cm

195,20 €
195,20 € 219,69 €
You save 11% (24,49 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This elegant volding garden umbrella with LED lights is an excellent option to create some shadow and protection against the harmful UV rays of the sun. When the sun sets, the LEDs will illuminate your garden or patio. The umbrillary cover, made of polyester with UV protection and discoloration resistant, provides optimal protection against the sun and is easy to clean. It has a resistant cross base for greater stability. The exclusive design of the garden umbrella tepermits tilting it and turning it 360 degrees to block the sun from any angle. The strong aluminum mast, together with the 8 rods, makes the umbrella very stable and lasting. This garden umbrella can be easily opened and closed thanks to the crank mechanism. In addition, this patio umbrella has 24 LEDs to illuminate your outdoor space and create a cozy and romantic atmosphere when the sun sets. Note: We recommend treating the umbrella fabric with a waterproofing spray if it undergoes heavy rains.

  • Color: Terracotta
  • Material: Pa, aluminum coating fabric
  • Total dimensions: 250 x 230 cm (high diameter x)
  • Cross base size: 64.5 x 64.5 cm (long x width)
  • It has air ventilation and crank system.
  • 360 degree inclinable and rotating design
  • Includes 8 aluminum rods
  • Includes 24 LED lights
  • Including a photoelectric cell
  • Requires assembly: Yes
The product is not suitable for climatic conditions such as strong winds, snowfall and extreme climatic conditions. This product works with 5 V CC, but the 5 V certified USB supply source is not included. High voltage can cause overheating and can cause damage to the device and the potential risk of overheating and fire.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.