Skip to product information
  • Vetonek Tienda de playa impermeable apertura rápida gris

Waterproof beach shop gray fast opening

46,05 €
46,05 € 51,83 €
You save 11% (5,78 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This beach store offers you and your friends a cozy refuge in the hot summer or you can use it as a shadow on the sandbox and the children's pool. Waterproof: This camping store, made of polyester with PU coating, is waterproof and wind resistant. Quick opening system: assemble the store effortlessly with the fast opening system. Tomb the store, extend the premonized rods until they fit and ready! Open door: the completely open door allows you to enjoy the beautiful beach landscape with your family or entertain children freely in a lovely summer afternoon. LIGERA AND PORTAL: The folding and light design allows you to easily pack the store and save it in the transport bag included to facilitate its transport. WARNING: Keep all the flames and heat sources away from the fabric of this product.

  • Gray
  • Store material: Polyester 190t with PU coating
  • Mesh material: Polyester 60D
  • Store dimensions: 205 x 200 x 115 cm (length x width x high)
  • Package dimensions: 84 x 11 x 11 cm (length x width x high)
  • Weight: 1.1 kg
  • Type of store: Beach store
  • Fast change system
  • With double zip access
  • With sandbags for greater stability
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x store
  • 1 x transport bag
WARNING maintain all the flames and heat sources away from the fabric of this product. The product is not suitable for climatic conditions such as strong winds, snowfall and extreme climatic conditions. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.