Skip to product information
  • Wolfcraft Caja de ingletar biselada 6948000

WOLFCRAFT BOOZELADA BOX 6948000

56,38 €
56,38 € 63,46 €
You save 11% (7,08 €)
Tax included. Shipping calculated at checkout.

Description

This wolfcraft groin and bezel box combines a bevel calibrator and a groin box in a product and is suitable for precise grocer cuts and measure room angles between 85 ° -180 °. It is especially suitable for old buildings, thanks to its infinite angle adjustment between 85 ° -180 °. The measurement of the angles of the room will be easier and more comfortable! This tool allows you to make automatic repeated cuts without errors of the same angle, thanks to the integrated guide pins for the Hand Sierra (groin). There will be no more scratches on the head when adjusting the right angle for the mountains. It is suitable for rolled with a maximum height of 70 mm.

  • Dimensions: 100 x 105 x 353 mm (length x width x height)
  • Function 2 in 1: Bevel caliber and groin box in a single product
  • To make precise groin cuts
  • To measure angles from 85 ° -180 °
  • Automatic transfer, without errors, repeated cuts of the same angle thanks to the integrated guide pins for the Hand Sierra (groin)
  • Easy room measurement of room angles
  • Especially indicated for old buildings thanks to infinite adjustments between 85 ° -180 °.
  • No more scratches when configuring the angle of the mountains
  • Suitable for rolled with a maximum height of 70 mm

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.