Wolfcraft Mecanic Sealing Gun Mg 200 ergo 4352000

22,62 €
22,62 € 25,46 €
You save 11% (2,84 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This MG 200 ERGO Silicone Pistol of Wolfcraft is used for polyurethane joints, chemical sealing, stuck and for repairs. This mechanical silicone gun is suitable for use with silicone, acrylic, etc. It adapts to all the materials in 310 ml cartridges with a diameter of 50 mm, and changing the cartridges is very easy. With the automatic drip detention function, this mechanical gun to seal prevents the putty from coming out after the trigger is released. Its ergonomic design mango and its rotating handle ensure easy and fatigue.

  • Material: Fiberglass reinforced plastic.
  • Total dimensions: 350 x 175 x 65 mm (length x width x height)
  • Suitable for use with silicone, acrylic etc.
  • Suitable for all 310 ml cartridges: 50 x 225 mm (diameter x long)
  • Easy cartridge change
  • With automatic drip arrest function: prevents the putty from leaving after releasing the trigger
  • Rotating handle
  • Ergonomic mango design for use without fatigue.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.