Skip to product information
  • wolfcraft Banco de trabajo con tornillo Master 600 6182000

Wolfcraft Work Bank with Master 600 6182000

221,73 €
221,73 € 249,55 €
You save 11% (27,82 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The Wolfcraft Master 600 model is a universal work table with screw that must be present in any workshop, garage or home. This device is equipped with an adjustable frontal gag with 2 handles and a base structure with a fast folding system and an integrated tools shelf. As it is adjustable in height, you can maintain an ergonomic work posture, regardless of whether it is standing or sitting, while the extension plate gives you additional work space. This work bank has a maximum load capacity of 120 kg and a maximum support of 10 °. The adjustment scale at the top of the work table will be useful when you need exact measurements for your work piece. The delivery also includes 1 extension plate, 2 jaws to hold round work and 4 plastic jaws to ensure the work piece horizontally.

  • Dimensions (displayed): 650 x (780-955) x (420-530) mm (length x height x width)
  • Dimensions (folded): 650 x 1065 x 210 mm (length x height x width)
  • Weight: 15.1 kg.
  • Work height: 78-95 cm.
  • Maximum range/with fastening jaws: 115/435 mm
  • Dimensions of the work table: 650 x 420 mm (width x length)
  • Maximum load capacity: 120 kg
  • Maximum support angle: 10 °
  • Support system: mangoes, adjustment clamping jaws
  • Adjustment Aid: Scale
  • MD countertop, tiltable 0-65 °
  • Base structure with rapid folding system and integrated tool holder
  • Adjustable height with blockable extension.
  • Larger table area due to the use of an extension plate
  • IMAN ON THE MDF board for the storage of screws and nails.
  • Includes 1 extension plate, 2 additional jaws to hold round work pieces, 4 plastic jaws to secure the work piece horizontally

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.