Nevera with wheels and asa pp and peg and gray 60 l v86
Description
With this portable fridge, you will always have fresh food and drink in any outdoor activity, on short or long trips. Great capacity: The fridge has a fridge and freezer area, which offers a wide storage space to store drinks, fruits, vegetables, ice cream and meat. The removable basket is also practical to adjust the interior space and to organize various foods. Efficient infriend: the electric fridge has a powerful compressor that cools quickly. The thermal insulation provides prolonged cooling and retains freshness and delicate taste The cold system stops when the established temperature is reached and operates again if the fridge temperature increases degrees. Protection for the car battery: with the temperature storage function and the battery protection system , the portable fridge prevents the vehicle battery from being exhausted. Anti -vibration function: Anti -vibration and sealing design make the refrigerator with compressor well protected. In addition, it works normally, without leaks, by roads with potholes. Portable design: the car fridge can easily move anywhere thanks to the side handle and the wheels. It is the ideal accessory for festivals, excursions, pícnics and camping.
- Color: Black and Gray
- Material: polypropylene (PP), polyethylene (PE)
- Total dimensions: 72 x 35 x 54.5 cm (wide x high x high)
- Interior dimensions (left): 23 x 27 x 46.5 cm (deep x high x high)
- Interior dimensions (right): 29 x 27 x 29.5/46.5 cm (wide x high x high)
- Capacity: 60 l
- Power: 12/24 V CC or 100-240 V ca
- With touch control panel and LED screen
- With integrated LED light
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.