Japanese Pasbble
Description
White concrete slabs: modern Japanese step for your garden
Discover ours original slabs and unique that will transform your outer space. This Japanese white concrete step, large and contemporary design, it is perfect to enhance the beauty of your garden, either surrounded by decorative gravel or on the grass.
Product characteristics
- QUALITY MANUFACTURE: This product is made with GRC state -of -the -art concrete, which guarantees a Ultra resistance With little thickness.
- Recycled materials: In addition, it incorporates recycled materials, contributing to the care of the environment.
- Exquisite finish: Its design and finish make it ideal for those who seek an aesthetic and functional option.
- Launch: This new product was released in November 2020.
Placement of Japanese steps
Installing these slabs is simple. They can be placed directly on the earth, grass or gravel. To ensure more stability and comfort to the footprint, we recommend placing the slabs on a thin layer of sand (1 to 2 cm is sufficient). This ensures that the slab remains fixed in place.
3 -piece pebble series sizes
Currently, we offer the biggest piece, which measures 70x57x3.5 cm, with an approximate weight of 30 kg. Two smaller pieces will be available in the first half of 2022.
Transform your garden with these Japanese concrete slabs, the modern touch you need for your home.
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.