Wolfcraft Bank for Machine and Master 750 Ergo Table

It does not matter if it is used as a support table or as a bank for machines, the Master 750 Ergo of the Wolfcraft brand provides an ergonomic design, safety and versatility at work. You can regulate the height in order to find the right one to work comfortably. Adjustable height in 6 levels: The table height can be regulated at six different levels between 725-950 mm in order to find the individual height to work comfortably without back voltage. HAPPY FASTER: You can unlock the fast adjustment by pulling from the levers to the left and right below the board and bring the front board to the workpiece quickly and comfortably. Now you just have to turn the cranks 2-3 times to hold the workpiece safely and firmly. Large plastic morders included: the clamping jaws are equipped with a reversible paint tip that facilitates the paint of the work pieces And it saves you time. If you want to raise the work piece, use the side equipped with the support pin with non -slip support. Stable design: the robust structure of the base, made with excellent tubular steel, has a fast folding system to achieve flexible transport and A storage that saves space. Thanks to the non -slip rubber pads under the legs, you can support the table against the wall safely when folded. Mounted to mount: The basic elements of the Master 750 Ergo are premonized so that their implementation shortly after the delivery is An easy and fast process.

• Color: Gray, Green and Black
• Material: Metal and plastic
• Dimensions: 68 x 70 x 95 cm (wide x high x high)
• Dimensions (folding): 97 x 68 x 19 cm (length x width x high)
• Dimensions of the work surface: 68 x 39/52 cm (length x wide)
• Adjustable work height: between 72.5 and 95 cm
• Height adjustment in 6 steps
• Vertical support of work pieces: up to a width of 110 mm
• Horizontal clamping width: max. 130 mm
• Horizontal clamping width (with clamping jaws): max. 425 mm
• Angle of the inclinable work surface: max. 60 °
• MDF table plate with beveled edges
• Manufactured with resistant tubular steel
• Maximum load capacity: 125 kg
• Lace and extension points with locking for safety
• Fast Front Board adjustment
• Fast folding function to save storage and transport space
• Bevelar Transport Hollow
• Oval and smooth aluminum bar (to transport it comfortably)
• Tools with support tools (to save plastic jaws or other tools)
• Legs with non -slip rubber pads
• Premontado Base Elements
• Easy to ride
• Weight: 13.2 kg
• The delivery contains:
• 4 x plastic jaws with non -slip supports (to hold pieces horizontally)
• 2 x tube clamps (or fastening of round material)
• Fixing material (to mount fixed devices)
• 1 x Bank for machines and Master 750 ergo table

Security General Safety Information Warning. Failure to comply with security indications and instructions entails injury risk! Failure to comply with information and safety instructions can cause electric shocks, fires and/or serious injuries. a) Following the security information and the instructions provided in these operating instructions, personal injuries and property damage can be avoided when working in or with the product. b) Before starting any work, read the operating instructions, in particular the security chapter and the respective security instructions. It is important to understand the information that has been read. Always obey the following safety instructions: - Mount the work table correctly and check that all handle screws and screwed joints are tight before starting working. A correct assembly guarantees that the table does not fold and that the board does not incline involuntarily. - Never use your work table inadequately or for an unplanned purpose! Any use other than the expected can cause dangerous situations. - Keep your work area clean and remove all unnecessary elements from the work table. Disorder in the work area can cause accidents. - Make sure your hands are not trapped in the folding, sliding or tilting of the work table. Risk of injury. - Never work with a defective work table! - Firmly hold the piece to mechanize! It is safer to hold a work piece with jaws or other clamping devices than with your hand. - Make sure all screws and handles of the handle are tight during transport. - Place the work table on a firm, level and horizontal surface. If the work table can slip or wobble, the workpiece or the electrical tool cannot be controlled evenly and safely. - Make sure both eccentric levers are always tight so that the table height cannot change. - Install the work table correctly before mounting the electric tool. - Firmly fix the electric tool to the work table before using it. If the electric tool slips on the work table, control can be lost. - Make sure the electric tool is mounted in the center of the work table. If the electric tool is not focused on the work table, this can mean that the center of gravity of the electric tool is not aligned with the center of gravity of the work table, so the table can turn. - Make sure long work pieces unbalance the work table. Long pieces should rely on the free end. - Use adequate personal protective equipment: protection for ears, safety glasses, antipolvo mask if the work generates dust, protective gloves when working with rough materials and when changing tools. - Do not save the outdoor work table or in a humid environment. There is a risk of corrosion and the countertop can deform. - Be sure to follow the instructions and safety information provided in the original operating manual of the electrical tool used. The machines used must comply with DIN in 62841-1 or DIN in 60745-1. The devices manufactured after 1995 must carry the CE brand.