Nettle Extract natural fertilizer and crop protector
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Nettle Extract natural fertilizer and crop protector
🌿 Artisan Nettle Extract – Super Concentrated
The natural ally for your conscious crops
• 🌱 Made from macerated fresh nettles, this extract preserves all the strength and vitality of a wild plant traditionally valued in organic orchards and self-sufficient gardens for its high content of nitrogen.
• 💧 Super concentrated: dilute between 50 and 100 ml per liter of water and apply according to your care rhythm, recommending intervals of 10 to 15 days. A small amount, a big haul.
• 🌼 Ideal to integrate into natural, regenerative or biodynamic cultivation routines. Use it foliar or on the ground depending on the moment of your plants' cycle for balanced and constant support.
• 🪱 Suitable for those seeking to promote a healthy ecosystem, respecting the rhythms of the earth and biodiversity, favoring vigorous and sustainable development.
• 🧴 Presentation in reusable and recyclable packaging, designed for practical and responsible storage.
🚜 Local and artisanal production.
Key benefits
• Natural supply of nitrogen for green and vigorous growth.
• Easy to use and highly profitable due to its concentration.
• Versatile: foliar or soil application in multiple growing systems.
• Sustainable approach: encourages practices that respect the soil and biodiversity.
How to use
1) Shake before use.
2) Dilute 50–100ml/L water.
3) Apply each 10–15 days foliar route (morning/afternoon) or irrigation, adjusting the frequency according to the response of the crop.
Suggestions
• Complement with other organic farming practices to maximize results.
• Store in a cool, dark place to maintain its properties.